PVC Spiral Supply - Wire Equipment

email: sales@PVCSpiralSupply.com

Idaho:
Local Phone: 208-377-9301
Toll Free: 1-800-461-9301

Florida:
Local Phone: 813-901-8488
Toll Free: 1-866-901-8488

Idaho:
Local Phone: 208-377-9301
Toll Free: 1-800-461-9301

Florida:
Local Phone: 813-901-8488
Toll Free: 1-866-901-8488

FAX: 208-377-3759

We provide special dealer discounts, depending on qualifications and quantities purchased.

To expedite new orders, we accept Visa, MasterCard, Discover, and American Express! We also offer Net 30 day terms, OAC.

Track Your UPS Shipment HERE

Contact Information
To contact us for more information or to place an order, please use the phone numbers listed below, or e-mail us at sales@PVCSpiralSupply.com

Marlon RB-520 - CALL for Special Pricing

Marlon RB-520 Specifications

Bound Edge - max 520mm (20.04")
Pitch - 4-1, 3-1, 2-1
Power - 220 volt 50 Hz single phase
Air Pressure - 7 bar (100 psi, 10.6 cfm)
Cycle Speed - 1900 per hour/practical book output 800-1500 binds per hour
Weight - 814 lbs
Length - 23"
Width - 31.5"
Height - 51.2"
Wire Diameter Changeover - 15 minutes
Calendar Hanger Unit - Model CH290
Maximum Hanger Length - 11.4"
Machine Cycles Per Hour - 1900
Throughput - up to 1500 per hour depending on operator skill and product

For More
Information & Pricing
Call Toll Free:
1-800-461-9301

The Marlon RB-520 semi automatic wire closing system is capable of an output of up to 1500 books per hour depending on operator skill and the book being bound.

The Marlon RB-520 utilizes closing bars to ensure quality controllable wire closes. The wire is fed automatically to the binding table by a pitch wheel and pitch belt, arriving in the ready position to accept the book.

Each section of wire is firmly held in position ready to accept the book for wire insertion. The wire is closed into the book automatically. The wire is fed from a spool mounted on the auto-feeder, (spool unwind unit) which separates the nick paper from the wire for trouble-free operation.

Full digital control gives the Marlon RB-520 extremely fast setup that allows short run jobs to be run economically. The touch button digital control panel clearly displays all functions for simple operator setup and changeovers. Select "Hanger" and the Marlon RB-520 will automatically feed a hanger if required onto the wire for closing.

HC 8000 Wire Closer	The HC-8000 offers a 14" legal size capacity and closes books from 3/16" to 1 1/4" thick. The settings for wire sizes are fast and accurate, providing a significant savings on wire costs: wire that is spoiled during the set-up and adjustment of competitive closers. An available optional wire hanger attaches to the HC 8000 and holds the wire in position to hang punched sheets onto the double loop wire.

HC 8024 Wire Closer	The HC-8024 provides you with an affordable wire closer for binding up to 24" documents. Doing the job of machines that cost hundreds of dollars more the 8024 offers fast, accurate wide application closing. Comes complete with an adjustable table for the support of extra long documents.

Wire Binding Information

Wire Binding is one of the most popular commercial book binding methods used in North America and is known by a number of different names including twin loop wire, wire-o, double loop wire, double-o, ring wire and wirebind. With this binding method, users insert their punched pages onto a U shaped element and then use a wire closer to squeeze the spine until it is round. Documents that are bound with wire binding will open completely flat on a desk and allow for 360 degree rotation of bound pages.

Pitches / Hole Patterns: There are three common hole patterns used in Wire binding documents with double loop wire. Each hole pattern has specific sizes and applications where it is best suited. Here is a quick overview of the different options...

Wire 3:1 Pitch (3 Holes Per 1"): The three to one pitch hole pattern is most commonly used for wire binding small sized documents with double loop wire. Spines for wire binding are available in sizes between 3/16" and 9/16" in diameter. Three to one pitch wires are not available in sizes larger than 9/16". The size of the holes used with this wire binding pattern simply does not allow for larger spines to be produced. The hole pattern used for 3:1 pitch wire binding can use either square or round holes.

Wire 2:1 Pitch (2 Holes Per 1"): A two to one pitch / hole pattern is most commonly used for wire binding larger sized documents it can also be used for binding smaller diameter books. 2:1 pitch wire is most commonly found in sizes ranging from 5/8" up to 1-1/4". However, a couple of manufacturers make wire binding special small sized 2:1 pitch wire for binding documents as small as 1/4". The holes for this type of wire binding are normally rectangular but can sometimes be square or round depending on the manufacturer of the paper punching equipment that you use.

Wire Binding Process: Binding documents using the double loop wire binding involves just a few basic steps.

	Put together the document including covers and measure the document overall thickness to determine the correct size of wire binding element.
	Set up your wire binding machine so the holes are centered on your paper.
	Divide your document into appropriate sections and punch it using your wire binding machine or modular multipurpose binding punch.
	Place the pages of your document onto the U shaped wire binding elements by hanging them on it.
	After carefully arranging the pages of the document over to the wire binding closer, engage the machine to squeeze the element together until the U shape becomes an O shape- usually with a lever action closer although there are pneumatic systems out there.

Wire Binding (twin loop / double loop) Equipment: Binding documents with double loop / twin loop wire requires a binding machine including a wire closer. Low volume operators will often find a small less expensive manual wire binding machine that offers a manual hole punch and a built in wire closer to be adequate. Medium volume users will often require a wire binding machine with an electric punch that can or cannot include a wire closer, wire closer can always be separate. High volume wire binding users such as print shops, larger binderies, and in-house printers will split the punching and final stages of the binding process (punching, hanging pages on the wire and closing the wire) wire in order to increase productivity. These users will often use a higher end heavy duty modular interchangeable die punch or an automated punching system along with either a manual or an electric wire closing machine.

Home ◊ Company Info ◊ Coil Binding Equipment ◊ Crimpers ◊ Forming Machines ◊ Filament ◊ Coil Pricing
Wire Equipment ◊ Wire Pricing ◊ Dealer Information ◊ Best Buy Binding

PVC Spiral Supply, Manufacturers of: coil binding equipment - forming machines - plastic spiral coil

spiral, coil, binding, bindings, plastic, spirals, 4:1, 3:1, 5:1, black, white, clear, red, moss, green, royal, brown, orange, forest, leaf, baby, charcoal, lilac, evergreen, hot pink, pink, gold, silver, purple, burgundy, reflex, mid, pea, antique, comb, 19 ring, machine/ binding machine, pvc, wire, wire/ binding, metal binding, twin loop, 2:1, wire o, wire-o, double loop, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, covers, binding covers, binder, clear covers, cover stock, round corner, square corner, matte, grain, report, reports, 8.5, 8.5 in, 8.5", 8.5 inch, 11, x, 11 in, 11 inch, 11", 8.5x11in, 8.5x11inch, 8.5x11", 3 mil, 5 mil, 7 mil, 10 mil, gauge, notebook, spiral notebook, packaging supplies, laminators, laminating, pouch, pouches, width, 9, 13, laminator pouch, laminating pouch, packaging machines, binding supplies, binding supply, supplier, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 22mm, 23mm, 25mm, 28mm, 30mm, 32mm, 35mm, 38mm, 40mm, 45mm, 50mm, 56mm, 62mm, 80mm, 12", 12 in, 12 inch, 36", 36 in, 36 inch, 36", GBC, Sircle, Rhino, Rhin-o-tuff, akiles, roll@coil, roll a coil, inserter, coiler, versamac, WiAir,